7-14 Setup and Password Security User's Manual
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as
IM_267UK
User password
To enter a user password, execute TSETUP, then:
1.
Go to the
Password
item and press the
Space
or
BkSp
key to display
the following prompt:
Password =
2.
Enter a password of up to 10 characters. The character string you
enter is displayed as a string of asterisks. For example, if you enter a
password consisting of four characters, the display is shown as:
Password = ****
If you press
Enter
before entering the password, Not registered will
appear on the display.
3.
Press
Enter
. The following message appears, allowing you to verify
the password.
Verify Password =
4.
If character strings match, the password is registered and the display
changes to:
Registered
If they do not match, the following message appears along with a beep
indicating you must repeat from step 2.
Entry Error!!
To Next Page
Loading...
