User's Manual Getting Started 3-5
Version
1
Last Saved on 30/04/00 19:48
Satellite 2750/2770 User's Manual – Satellite 2750 UK.doc – ENGLISH – Printed on 30/04/00 as
IM_275UK
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power.
The AC adaptor can be connected to any power source supplying from 100 to
240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the
battery pack, refer to Chapter 6,
Power and Power-Up Modes
.
Use of the wrong adaptor could damage your computer. Toshiba assumes
no liability for any damage in such case. The current rating for the
computer is 4.0 amperes.
1.
Connect the power cord to the AC adaptor.
Connecting the power cord to the AC adaptor
2.
Connect the AC adaptor’s DC output plug to the
DC IN
input port on
the back of the computer.
Connecting the adaptor to the computer
3.
Plug the power cord into a live wall outlet. The
Battery
and
DC IN
indicators on the front of the computer should glow.
To Next Page
Loading...
