Part I: Getting to Know Your Computer
Learning the Basics
Turning off the computer
90
Going into Hibernation mode more quickly
You can also put the computer into Hibernation mode by
pressing the power button or closing the display panel.
To use either of these methods, you first need to turn it on in
To s h ib a ’sPowerSaverutility.
1 Open the Start menu, point to Settings, then click
Control Panel.
2 In the Control Panel window, double-click the Power
Saver icon. If the Toshiba Power Saver icon is not
present: click View all control panel options on the left
side of the panel.
3 In the Running on batteries area, click the Details
button, then select the System Power Mode tab.
4 Select Hibernation for the options you want.
When I press the power button
Set this option to Hibernation for the computer to go
into Hibernation mode when you press the power
button.
When I close the lid
Set this option to Hibernation for the computer to go
into Hibernation mode when you close the display
panel.
5 Click Override all Modes with settings here.
6 In the Set to range dialog box, do one of the following:
Click DC only for the settings to apply only when
you are using battery power.
Click All for the settings to apply whether you are
using battery power or outlet power.
7 Click OK.
To Next Page
Loading...
