4 Replacement Procedures 4.1 General
Removing the PCI Express Card
Remove the PCI express card according to the following procedures and Figure 4-2, after
checking that the computer is turned off in boot mode.
1. Push the eject button for the PCI express card to be removed until it stops and release
the button.
2. When the eject button pops out slightly, push it again.
3. When the PCI express card pops out, grasp it and pull it out.
Figure 4-2 Removing the PCI express card
4-10 Satellite A100/A105 / TECRA A7 Maintenance Manual
To Next Page
Loading...
