4.4 Bluetooth Card 4 Replacement Procedures
4.4 Bluetooth Card
Removing the Bluetooth Card
Remove the Bluetooth card according to the following procedures and Figure 4-14.
1. Disconnect the antenna cable with tweezers.
2. Disconnect the Bluetooth SUMI-card connector CN9 on the system board.
3. Remove two M2x3 white bind screws.
4. Remove the Bluetooth card.
Figure 4-14 Removing Bluetooth card
Satellite A100/A105 / TECRA A7 Maintenance Manual 4-27
To Next Page
Loading...
