4 Replacement Procedures 4.11 CPU
4.11 CPU
Removing the CPU
Remove the CPU according to the following procedures and Figures 4-28, 4-29 and 4-30.
CAUTION: When removing the CPU, keep the following in mind:
The CPU can become very hot during operation. Be sure to let it cool down before
starting repair work.
NOTE: FOXCONN CPU socket will be 180 degrees to the right.
1. Unlock the CPU by rotating the cam on the CPU socket 120 degrees to the left with a
flat-blade screwdriver (in the order shown in the figure below).
2. Remove the CPU.
Figure4-28 Removing the CPU
4-46 Satellite A100/A105 / TECRA A7 Maintenance Manual
To Next Page
Loading...
