Toshiba Satellite A100 - Installing the Touch Pad and Button Board

4 Replacement Procedures 4.19 Touch Pad and Button Board
4-68 Satellite A100/A105 / TECRA A7 Maintenance Manual
Installing the Touch Pad and Button Board
Install the touch pad and button board according to the following procedures and Figure 4-42.
1. Connect the button board flat cable to CN2000 on the button board.
2. Seat the button board in the correct position and secure it with two M2.5x3 flat-
round-head screws.
3. Seat the touch pad in the correct position and secure it with five M2.5x4 black flat-
head screws.
4. Connect the touch pad flat cables to JP1 on the touch pad.