2 Troubleshooting 2.2 Basic Flowchart
2-2 Satellite A100/A105 / TECRA A7 Maintenance Manual
2.2 Basic Flowchart
The basic flowchart in Figure 2-1 serves as a guide for identifying a possibly faulty FRU.
Before going through the diagnostic flowchart steps, verify the following:
Ask the user if a password has been registered and, if so, ask him or her to enter the
password. If the user has forgotten the system password, use a jump wire to make a
short circuit on M/B C88 , then turn the computer power on. When booted, the
computer overrides password protection and automatically erases the current
password.
Make sure the Windows® XP Home Edition has been installed on the HDD. Any
other operating system can cause the computer to malfunction.
Make sure any piece of optional equipment has been installed.
To Next Page
Loading...
