Toshiba Satellite A100 - Irda Manslave Test; System Information

3.2 Quick Start 3 Diagnostic Programs
Press any key to quit when you want to stop
3.2.13 IrDA ManSlave Test
Below is the Slave Testing window.
3.2.14 System Information
This function is used to read the system information. When the test is completed, a file
named System.log will be saved in the defined location. During the reading process, the
following screen will be displayed to indicate that the progress is in detection:
Satellite A100/A105 / TECRA A7 Maintenance Manual 17