4-5
Using optical media drives
O
PERATING
B
ASICS
Loading discs
To load CD/DVDs, follow the steps below and refer to figures 4-4 to 4-8.
1. a. When the power is on, press the DVD-ROM eject button to open the
drawer slightly.
Figure 4-4 Pressing the DVD-ROM eject button
b. Pressing the eject button will not open the drawer when the DVD-ROM
drive’s power is off. If the power is off, you can open the drawer by
inserting a slender object (about 1.5 mm) such as a straightened paper
clip into the eject hole just to the right of the eject button.
Figure 4-5 Manual release with the eject hole
EJECT BUTTON
EJECT HOLE
To Next Page
Loading...
