4.4 HDD 4 Replacement Procedures
5. Remove four black M3x3 screws that secure the EMI Shielding to the HDD.
Figure 4-6
Removing the EMI Shielding
6. Remove the HDD from the EMI Shielding.
Installing the HDD
To install the HDD, follow the steps below and refer to the figures in the preceding section.
1. Seat the HDD in the EMI Shielding, and secure it with four black M3x3 screws.
2. Insert the HDD unit into the HDD slot.
3. Secure the HDD with three black M2.5x3 screws.
4. Secure the HDD door with three black M2.5x4 safety screws.
Detroit 20 /Detroit 20E Series Maintenance Manual [CONFIDENTIAL] 4-11
To Next Page
Loading...
