53
Getting Started
Adding memory (optional)
cutouts in the side of the module. If the latches and cutouts do
not line up correctly, repeat steps 12-13.
(Sample Illustration) Pressing down on the memory module
Do not force the memory module into position. The memory
module should be completely inserted into the socket and level
when secured in place.
(Sample Illustration) Inserting the memory module into the slot
For this model, slot A is the bottom slot. Slot B is the top slot. If only
one memory is to be installed, it must be installed in slot A.
14 Replace the memory module slot cover and secure it using the
captive screw.
15 Re-insert the main battery. For more information on inserting
the main battery, see “Inserting a charged battery” on page 107.
16 Turn the computer right side up.
17 Reconnect the cables.
18 Restart the computer.
latch
latch
Slot B
Slot A
To Next Page
Loading...
