9-8 Satellite A200/Satellite Pro A200
Optional Devices
7. Push the module down so it lies flat. Latches on either side will click into
place to secure the module.
Installing a module
8. Seat the cover and secure it with the screw.
9. Replace the battery pack as described in Chapter 7, Power and Power-
Up Modes.
10. Turn the power on and make sure the added memory is recognized.
Removing Memory on Bottom Side
1
2
The Slot A is reserved for main memory, the upper slot. Use the slot B for
expanded memory, the bottom slot. If only one card is installed, use the
slot A.
B
A
If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature before
you replace them.
To Next Page
Loading...
