4 Replacement Procedures
Minnesota 10M/10MG Series Maintenance Manual 4-45
4.17 Touch Pad
To remove the Touch Pad, first remove the display assembly, keyboard, and top cover. Then
follow the steps below:
Removing the Touch Pad
1. Turn over the top cover. Remove the Touch Pad cable from the Touch Pad module.
Figure 4-51 Removing the touch pad cable
2. Remove one M2.5x4 screw securing the Touch Pad Bracket to the top cover.
Figure 4-52 Removing the touch pad bracket screw
To Next Page
Loading...
