Optional Devices
8-10 User’s Manual
O
PTIONAL
D
EVICES
Figure 8-7 Removing the cover
6. Insert the memory module into the connector on the computer. Press the
module carefully and firmly to ensure a solid connection.
7. Push the module down so that it lies flat and is secured by two latches.
CAUTION: Do not touch the connectors on the memory module or
on the computer. Debris on the connectors may cause memory
access problems.
Figure 8-8 Inserting the memory module
8. Seat the cover and secure it with one screw.
9. When you turn the computer on, it should automatically recognize the total
memory capacity. Use the HW Setup program to verify that the added
memory is recognized. If it is not recognized, check the module’s connec-
tion.
To Next Page
Loading...
