Toshiba Satellite A300 Series - Deleting a User Password; Display Settings Configuration; Power On Display Options

Replacement Procedures
4.12 USB Board
The following describes for removing the cover assembly (See Figure 4-23).
Removing the USB board
1. Loose the below screws and then incline pull out USB board.
z M2.5x6.5 FLAT BIND screw x2
Figure 4-23 Removing the USB Board
Installing the USB board
1. Insert the USB board into base case
2. Fix the below screws
M2.5x6.5 FLAT BIND screw x2
NOTE: Be careful not to catch the cables between cover assembly and base assembly.
Satellite A300 Maintenance Manual(960-Q08)
4-35