User’s Manual 7-1
Chapter 7
HW Setup and Passwords
This chapter explains how to use TOSHIBA HW Setup program to
configure your computer and how to set passwords.
HW Setup
TOSHIBA HW Setup allows you to configure settings for General,
Password, Display, CPU, Boot Priority, Keyboard, USB, LAN and LED.
Accessing HW Setup
To start the utility, click the Windows Start button, point to All Programs,
click TOSHIBA, click Utilities, and select HWSetup icon.
HW Setup window
The HW Setup window contains the following tabs: General, Password,
Display, CPU, Boot Priority, Keyboard, USB, LAN and LED.
There are also three buttons:
OK, Cancel and Apply.
If the supervisor password is set, access to the TOSHIBA HW Setup
program can be prevented when the user password is used to log on to the
computer.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.
To Next Page
Loading...
