4.4 Keyboard Cover and Keyboard 4 Replacement Procedures
Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-25
Installing the Keyboard Cover and Keyboard
Install the Keyboard cover and keyboard according to the following procedures and Figure 4-
14, 4-15.
1. Connect the keyboard cable to CN11 on the system board.
2. Secure the keyboard with two M2.5x2.5 black flat head screws.
3. Place the speaker cover in the correct position and secure the following 15 latches, in
the following order:
- Seven bottom latches
- Eight front latches
4. Close the display and turn the computer over.
To Next Page
Loading...
