4 Replacement Procedures 4.16 FL Inverter Board
4.16 FL Inverter Board
Removing the FL Inverter Board
Remove the FL inverter board according to the following procedures and Figures 4-35.
1. Remove one M2.5x4.5 white flat head screw securing the inverter board bracket.
2. Remove one M2x3 black flat head screw securing the inverter.
M2.5x4.5 white flat head screw-
LCD module
LCD FL cable/
HV cable
FL Inverter board
Fl inverter board bracket
M2x3 black flat head screw-
Figure 4-35 Removing the FL inverter board
3. Lift the LCD module, FL inverter board and disconnect the LCD/FL cable from the
LCD/FL connector.
4. Disconnect the HV cable from the HV connector and remove the FL inverter board.
4-54 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A3000 Maintenance Manual
To Next Page
Loading...
