4.16 FL Inverter Board 4 Replacement Procedures
Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-55
Installing the FL Inverter Board
Install the FL inverter board according to the following procedures and Figures 4-35.
1. Connect the LCD/FL cable to LCD/FL connector, and connect the HV cable to the
HV connector.
2. Seat the LCD module, FL inverter board in the correct position.
3. Secure one M2x3 black flat head screw securing the inverter.
4. Secure one M2.5x4.5 white flat head screw securing the inverter board bracket.
To Next Page
Loading...
