4.7 Optical drive 4 Replacement Procedures
Satellite A40 Maintenance Manual (960-458) 4-25
Installing the Optical drive
To install the optical drive, follow the steps below and refer to figures 4-10 and 4-11.
1. Seat the optical drive on the plastic frame, and secure them with the following screws.
• M2×3C S-FLAT HEAD screw ×2
• Stepping screw ×1
2. Insert the optical drive into the slot to connect it.
3. Secure the optical drive with the following screws.
• M2.5×4B FLAT HEAD screw ×2
To Next Page
Loading...
