4 Replacement Procedures 4.26 Fluorescent lamp
4-92 Satellite A40 Maintenance Manual (960-458)
4
4.26.4 Replacing the 15.0 Inch XGA CHIMEI Fluorescent lamp
Disassembling the 15.0 Inch XGA CHIMEI Fluorescent lamp
To disassemble the 15.0 inch XGA CHIMEI fluorescent lamp, follow the steps below and refer to
figures 4-75 to 4-80.
1. Remove the CU tape, yellow tape and protector film X.
Tape
CU tape
Protector film X
Figure 4-75 Replacing 15.0 Inch CHIMEI fluorescent lamp (XGA) (1)
To Next Page
Loading...
