HW Setup and Passwords
TOSHIBA A40 Series 71
TOSHIBA A40 Series Version
1
Last Saved on 02/12/2003 17:24
ENGLISH using Euro_M.dot –– Printed on 02/12/2003 as IM_A40EN
Chapter 7
HW Setup and Passwords
This Chapter explains how to use TOSHIBA HW Setup program to
configure your computer and how to set passwords.
HW Setup
TOSHIBA HW Setup lets you configure settings for Display, CPU, Boot
Priority, Keyboard, USB, LAN, General, Password, Device Config and
Parallel/Printer.
If the supervisor password is set, access to the TOSHIBA HW Setup
program can be prevented when the user password is used to log on to
the computer. Some models are not equipped with Parallel/Printer tab
and/or CPU tab.
Accessing HW Setup
To run HW Setup, click start, click Control Panel and select TOSHIBA
HW Setup.
HW Setup window
The HW Setup window contains the following tabs: General, Password,
Device Config, Parallel/Printer, Display, CPU, Boot Priority, Keyboard,
USB and LAN.
Some models are not equipped with Parallel/Printer and/or CPU tabs.
TOSHIBA A40 Series
User's Manual 7-1
To Next Page
Loading...
