User’s Manual 7-4
HW Setup and Passwords
USB
Legacy USB Support
Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB Legacy Emulation item to enabled.
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on from shutdown when it
receives awake-up packet ( Magic packet ) from the LAN.
Regarding Wake-up on LAN from sleep or hibernation, you must check the
"Allow the device to wake the computer" check box within the LAN Device
properties. ( This feafure does not effect the Wake-up on LAN from sleep or
hibernation. )
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled Enables the Wake-up on Keyboard feature.
Disabled Disables the Wake-up on Keyboard function
(Default).
Enabled Enables the USB Legacy Emulation. (Default)
Disabled Disables the USB Legacy Emulation.
Enabled Enables Wake-up on LAN from shutdown.
Disabled Disables Wake-up on LAN. from shutdown.
(Default)
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Enabled Enables Built-in LAN function (Default).
Disabled Disables Built-in LAN function.
To Next Page
Loading...
