4.6 Keyboard 4 Replacement Procedures
Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual 4-23
Installing the Keyboard
Install the keyboard according to the following procedures and Figure 4-9.
1. Connect the keyboard cable to CN13 and CN203 on the system board.
2. Secure the keyboard with four M2.5x2.5 black flat head screws.
3. Place the keyboard cover in the correct position and secure the following 14 latches,
in that order:
- One latch on right sides.
- Seven bottom latches.
- Six front latches.
To Next Page
Loading...
