4 Replacement Procedures 4.10 FM Module
4.10 FM module
Removing the FM module
Remove the FM module according to the following procedures and Figures 4-14.
1. Disconnect the FM flat cable from CN2360 on the system board.
2. Disconnect the FM flat cable from CN9001 on the FM module.
3. Disconnect the FM cable from CN9000 on the FM module.
4. Remove two M2.5x3.5 black flat head screws.
5. Remove the FM module.
M2 5x3 5 black flat head screw..
FM cable
FM flat cable
FM module
CN2360
CN9000
CN9001
Figure 4-14 Removing the FM module
4-30 Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual
To Next Page
Loading...
