4.10 FM Module 4 Replacement Procedures
Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual 4-31
Installing the FM Module
Install the FM module according to the following procedures and Figures 4-14.
1. Place the FM module in the correct position and secure the FM module with two
M2.5x3.5 black flat head screws on the bottom cover.
2. Connect the FM cable to CN9000 on the FM module.
3. Connect the FM flat cable to CN9001 on the FM module.
4. Connect the FM flat cable to CN2360 on the system board.
To Next Page
Loading...
