4 Replacement Procedures 4.11 Bluetooth Module
4 1
4.11 Bluetooth module
Removing the Bluetooth module
NOTICE: Don’t touch the double tape surface for keep double tape surface clean and
adhesive while remove the Bluetooth module from the ODD bracket.
Remove the Bluetooth module according to the following procedures and Figures 4-15.
1. Disconnect the Bluetooth cable from CN19 on the system board.
2. Disconnect the Bluetooth cable from the Bluetooth module.
3. Remove the Bluetooth module.
Bluetooth module
Bluetooth module cable
CN19
Figure 4-15 Removing the FM module
4-32 Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual
To Next Page
Loading...
