4.11 Bluetooth Module 4 Replacement Procedures
Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual 4-33
Installing the Bluetooth Module
NOTIC: Don’t touch the double tape surface for keep double tape surface clean and
adhesive while installing the Bluetooth module from the ODD bracket. If the double tape
has no adhesive or broken, please change a new double tape (V000900770).
Install the Bluetooth module according to the following procedures and Figures 4-15.
1. Place the Bluetooth module in the correct position on the ODD bracket.
2. Connect the Bluetooth cable to the Bluetooth module.
3. Connect the Bluetooth cable to CN19 on the system board.
To Next Page
Loading...
