4 Replacement Procedures 4.15 LED Board
4.15 LED Board
Removing LED Board
Remove the LED Board according to the following procedures and Figure 4-20.
1. Disconnect the LED flat cable from CN202 on the system board.
2. Remove one M2.5x3.5 white flat head screw securing the LED board.
3. Remove the LED board.
4. Disconnect the LED flat cable from CN9500 on the LED board.
LED board
LED flat cable
M2 5x3 5 white flat head screw..
CN202
CN9500
Figure 4-20 Removing the LED board
4-40 Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual
To Next Page
Loading...
