4.17 VGA Board 4 Replacement Procedures
4.17 VGA Board (for VGA Board Model)
Removing the VGA Board
Remove the VGA board according to the following procedures and Figure 4-24.
1. Remove two M2x3 black flat head screws.
2. Remove the VGA board bracket.
3. Remove two M2x5 white flat head screws.
4. Remove the VGA board.
M2x5 white flat head screw
M2x3 black flat head screw
VGA board
VGA bracket
Figure 4-24 Removing the VGA board
Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual 4-45
To Next Page
Loading...
