4 Replacement Procedures 4.27 Button Board
4-76 Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance
Manual
Installing the Button Board
Install the button board according to the following procedures and Figure 4-45.
1. Seat the touch pad bracket in the correct position and secure it with the four M2x3.5
black flat head screws.
2. Connect the button board flat cable to CN9301 on the button board.
3. Seat the button board in the correct position and secure it with the four M2x3.5 black
flat head screws.
4. Connect the touch pad flat cables to CN9305 on the button board and touch pad.
To Next Page
Loading...
