Toshiba Satellite A50S Series - Page 315

4.23 Fluorescent Lamp 4 Replacement Procedures
NOTE: Make sure there is no dust between the LCD panel and backlight unit. If any dust
is found, remove it with crepe tape or others which has no remaining of paste.
(
I
)
LCD
p
anel
Guide rib
Guide rib
(
H
)
Backli
g
ht unit
Guide rib
Guide rib
Make sure the LCD panel is
installed in the
g
uide rib
Figure 4-78 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (17)
Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 4-93