Toshiba Satellite A60 - Installing the ODD Bay Module

4 Replacement Procedures 4.6 ODD Bay Module
Figure 4-17 Removing the ODD bay module
Installing the ODD Bay Module
Install the ODD bay module according to the following procedures and Figure 4-16, 4-17.
1. Place the ODD bay module in the correct position and slide it in.
2. Push it until it clicks into place.
3. Close the display and turn the computer over.
4. Fix the ODD bay module with one M2x8 black bind screw.
4-28 Satellite A60/ Pro A60 Maintenance Manual