4 Replacement Procedures
4.13 Touch Pad
Removing the Cover
To remove the Touch Pad, first remove the top cover, then follow the steps below:
1. Disconnect the Touch Pad LED board FFC cable from the Touch Pad.
2. Remove one M2.5x3 screw securing the Track Pad Bracket. Lift out the Track Pad Bracket.
3. Remove twoM2.5x3 silver screws securing the LED PCB board. Lift it out.
Figure 4-21 Removing the touch pad
4-34 Satellite A70 Series Maintenance Manual
To Next Page
Loading...
