3. Tests and Diagnostics 3.9 Main Battery Change Test
3.9 Main Battery Charge Test
NOTE: The AC adaptor (120W/90W, 19V) should be connected to successfully run this test.
This test shows and measures the main battery:
Battery type (Ni-MH / Lion)
Manufacturer (Sony / Sanyo)
Remain charge capacity (0 ~ 100%)
Charge function (PASS/FAIL)
- “Battery Is Full” showed when “remain charge capacity” is 100%
The screen should display as below, indicating whether the test is passed or failed when finished.
3-12 Satellite A70 Series Maintenance Manual
To Next Page
Loading...
