Toshiba Satellite L350 - 4.13 Display Mask

4.13 Display Mask 4 Replacement Procedures
4.13 Display Mask
Removing the Display Mask
Remove the display mask according to the following procedures and Figure 4-27.
1. Remove the following 4 seals on the display module in that order:
- Two black seals on the bottom
- Two black seals on the top
2. Remove the following 4 screws on the display module, in that order:
- Two M2.5x7 white flat head screws on the top
- Two M2.5x7 white flat head screws on bottom
3. Release the following 21 latches on the display mask, in that order:
- Seven bottom latches
- Five latches on each of the left and right sides
- Four top latches
M2 5x7 black flathead screw.
Seal
Display mask
M2 5x7 black flathead screw.
Seal
Figure 4-27 Removing the display mask
Satellite L350/ Satellite Pro L350/ EQUIUM L350/ SATEGO L350 Maintenance Manual 4-45