User’s Manual 3-14
Getting Started
1. Load the Recovery Discs into the optical disc drive and turn off the
computer's power.
2. While holding down F12 key on the keyboard, turn on your computer -
when TOSHIBA Leading Innovation>>> appears, release the F12
key.
3. Use the up and down cursor keys to select the CD-ROM icon from the
menu. Please refer to the Boot Priority section in Chapter 7, HW Setup
and Passwords for further information.
4. A menu will be displayed from which you should follow the on-screen
instructions.
When drivers/utilities are installed, you can setup the respective
drivers/utilities from following place.
To open the setup files, Click Start → All Programs → TOSHIBA →
Applications and Drivers.
To Next Page
Loading...
