User’s Manual 4-3
Operating Basics
2. Grasp the disc tray gently and pull until it is fully opened.
Figure 4-3 Pulling the disc tray open
3. Lay the CD/DVD, label side up, in the disc tray.
Figure 4-4 Inserting a CD/DVD
When the disc tray is fully opened, the edge of the computer will extend
slightly over the area where you insert the media. Therefore, when loading
a CD or DVD, you will need to turn it slightly at an angle when you place it
in the disc tray. After loading the CD/DVD you should ensure that it is
properly positioned over the central spindle and that it lies flat within the
tray.
To Next Page
Loading...
