Toshiba Satellite L500D - Figure 4.7 Removing the Bracket from the ODD Drive; Installing the ODD Bay Module; Disassembling the ODD Drive

Error!UsetheHometabtoapply2tothetextthatyouwanttoappearhere.Error!Usethe
Hometabtoapply2tothetextthatyouwanttoappearhere. 4ReplacementProcedures
SatelliteL500DMaintenanceManual 4-19
InstallingtheODDBayModule
InstalltheODDbaymoduleaccordingtothefollowingprocedures.
1. PlacetheODDbaymoduleinthecorrectpositionandslideitin.
2. Pushitinuntilitmeetstheend.
3. SecuretheODDbaymodulewithoneM2x8screw.

DisassemblingtheODDDrive
NOTE:DonotdisassembletheODDdrivewhenitisworkingnormally.Disassembleor
replacetheODDdriveonlyifitfails.
DisassembletheODDdriveaccordingtothefollowingproceduresandFigure4.7.
1. RemovetwoM2x3
screws.
2. Removethebracket.

Figure4.7RemovingthebracketfromtheODDdrive

M2x3*2