Toshiba Satellite L510 Series - Removing the CPU Cooling Module and Fan (for VGA Module)

4ReplacementProcedures 4.12CPUCoolingModuleandFan
4-40 Satellite/SatelliteProL510/L515/L517  MaintenanceManual 
CAUTION:Whenremovingthecoolingmodule,keepthefollowinginmind:
Thecoolingmodulecanbecomeveryhotduringoperation.Besuretoletitcooldown
beforestartingtherepairwork.
Donottouchorcausedamagetothefaninthecoolingmodule.
RemovingtheCPUCoolingModuleandFan(ForVGAModule)
RemovetheCPUcoolingmoduleandfanaccordingtothefollowingproceduresandFigures
4-24,4-25,4-26,4-27and4-28.
1 RemovethefancablefromCN802onsystemboard.
2. RemovetwoM2x3blackflatheadscrewsonthefan.
3. Removethefan.
4. RemovetwoM2x3blackflatheadscrewsontheCPUcoolingmodulebracket.
5. RemovetheCPUbracket.
6. RemovetheCPUcoolingmodule.
