Toshiba Satellite L645 - Appendix C Wireless LAN; Card Specifications

Chapter 4 Replacement Procedures
5. Remove the following screws securing the HDD/SSD holder and remove the HDD/SSD
holder.
 M3.03.0B FLAT BIND screw x2
Figure 4-3-3 Remove HDD/SSD
Installing HDD/SSD-H9.5mm
The following describes the procedure for installing the main HDD/SSD.
1. Install a HDD/SSD to the HDD/SSD holder and secure it with the following screws.
 M3.03.0F FLAT BIND screw x2
NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for
four screws securing the HDD/SSD holder.
2. Insert the HDD/SSD assembly into the HDD/SSD slot and connect it carefully to the
MAIN HDD/SSD on the mother board.
3．Secure the HDD/SSD assembly with the following screw.
 M2.04.0B BIND screw x2
Satellite L640/L645, Satellite Pro L640/Pro L645 Maintenance Manual (960-Q08)