Chapter 4 Replacement Procedures
Installing a 3G module card
The following describes the procedure for installing a 3G module card. (See Figure 4-
7-3)
1. Insert a 3G module card terminals slantwise into the connector on the mother board
and press a 3G module card and lock the secure screws.
2. Connect the 3G module antenna cable to the terminals on a 3G module card.
3. Put the 3G module antenna cable on the bottom location from the guide.
Figure 4-7-3 Installing a 3G module card
Satellite L640/L645, Satellite Pro L640/Pro L645 Maintenance Manual (960-Q08)
To Next Page
Loading...
