7-7
HW Setup
HW S
ETUP
AND
P
ASSWORDS
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. Use the up/down cursor keys to select boot device you want and press
Enter.
NOTES: 1. If a supervisor password is set, the menu above does not
appear when you use the user password to start the computer.
2. The selection method above does not change the boot priority
settings in HW Setup.
3. If you press a key other than one of those above or if the
selected device is not installed, the system will boot accord-
ing to the current setting in HW Setup.
Keyboard
External Keyboard Fn key
Use this option to set a key combination on an external keyboard to emulate the
Fn key on the computer’s internal keyboard. Setting an Fn key equivalent will
let you use “Hotkeys” by pressing the set combination instead of the Fn key. (PS/
2 keyboard only)
Note: If you select Left Ctrl + Left Alt or Right Ctrl + Right Alt
for this option, you cannot use the selected keys to reboot the com-
puter in combination with the Del key. For example, if you select
Left Ctrl + Left Alt, you must use Right Ctrl, Right Alt and Del
to reboot the computer. Left Ctrl, Left Alt and Del cannot be used.
Disabled
No Fn key equivalent (Default)
Fn Equivalent
Left Ctrl + Left Alt
Right Ctrl + Right Alt
Left Alt + Left Shift
Right Alt + Right Shift
Left Alt + Caps Lock
To Next Page
Loading...
