245
Using ConfigFree™ with your Toshiba Computer
ConfigFree Utilities
5.375 x 8.375 ver 2.3
4 Click OK.
The default connection setting is for Ad hoc mode, therefore, if
the setting on the Toshiba Wireless Projector is in
Infrastructure mode, it will not connect. However, you can
change the settings to Infrastructure mode to match the
settings on the projector.
Sample Projector icon when connected with Quick Connect
If the wireless mode for the wireless setting is set for 5 GHz
(802.11a), Quick Connect changes this mode to 2.4 GHz
(802.11b) and then connects to the projector.
The wireless LAN configuration returns to the settings that
were last used before the Quick Connect function was started:
❖ If the Toshiba Wireless Projector utility is closed
❖ If you select Toshiba Wireless Projector (DPJ) from the
ConfigFree tray menu (this disconnects the wireless LAN
connection)
NOTE
To Next Page
Loading...
