59
Getting Started
Adding memory
5.375 x 8.375 ver 2.3
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector on the side you insert into the
computer.
9 Remove the new memory module from its antistatic
packaging.
10 Hold the memory module by its edges so that the gold
connector bar faces the slot, at a slight angle to the
socket.
Sample inserting the memory module into the socket
11 Check that the module is lined up with the socket clips.
Sample aligning the memory module in the socket
12 Gently press down on the memory module connector
until the clips snap into place.
To Next Page
Loading...
