6. Slide your fingernail or a thin object under the cover and lift it off.
Figure 4-5 Removing the memory module cover
1. Screw 2. Memory module cover
Product appearance depends on the model you purchased.
7. Lift the memory protection sheet. Push the latches away from the
module in order to release it - a spring will force one end of the module
up at an angle.
8. Grasp the module by its edges and remove it from the computer.
If you use the computer for a long time, the memory modules and the
circuits locating close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them. Or
you will get burnt if you touch any of them.
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
Figure 4-6 Removing the memory module
1. Latches
Product appearance depends on the model you purchased.
User's Manual
4-14
To Next Page
Loading...
