Toshiba Satellite P100 Series - Vga Heat Sink

Replacement Procedures
4-50 Satellite P100 Maintenance Manual (960-Q02)
4.19 VGA heat sink
Removing the VGA heat sink
The following describes the procedure for removing the VGA heat sink (See Figure 4-30).
1. Remove the following screws securing the VGA heat sink along 1 to 5.
• M2.5×3.0 BIND screw x5
2. Pull up the VGA heat sink straight and remove it.
Figure 4-30 Removing the VGA heat sink
1
3
4
2
5