10-8 Satellite P200/Satellite Pro P200
Troubleshooting
Password
i.LINK (IEEE1394)
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4, Operating Basics.
Monitor
Refer also to Chapter 9, Optional Devices, and to your monitor’s
documentation.
Problem Procedure
Cannot enter
password
Refer to Chapter 7, Power and Power-Up Modes.
Problem Procedure
i.LINK device does not
function
Make sure the cable is securely connected to the
computer and to the device.
Make sure the device's power is turned on.
Reinstall the drivers. Open the Windows Control
Panel and double-click the Add New Hardware
icon. Follow the on-screen directions.
Restart Windows.
If problems persist, contact your dealer.
Problem Procedure
Cannot access Wireless
LAN
Make sure the computer's wireless
communication switch is set to on.
Use the ConfigFree program that comes pre-
installed in your computer to see LAN status.
If problems persist, consult your LAN
administrator.
Problem Procedure
Monitor does not turn on Make sure that the external monitor's power
switch is on. Confirm that the external monitor's
power cable is plugged into a working power
outlet.
To Next Page
Loading...
