4 Replacement Procedures 4.16 Touch Pad
4.16 Touch Pad
Removing the Touch Pad
To remove the Touch Pad, first remove the battery pack, keyboard, and top cover, and then
follow the steps below:
1. Remove five M2.5x3 screws securing the Touch Pad bracket to the rear side of the top
cover.
Figure 4-46 Removing the touch pad screw
2. Disconnect the Touch Pad FFC cable from the Touch Pad.
Figure 4-47 Disconnecting the touch pad FFC cable
4-42
[CONFIDENTIAL]
Satellite P200
/ P205
Series Maintenance Manual
To Next Page
Loading...
